China Emergency Light Manufacturers introduces car ignition techniques:
1. Insert the key into the ignition
After the key is inserted into the ignition switch, stay in each gear for about
1 to 2 seconds. At this time, you can hear the sound of electrical equipment is
energized. At the same time, when the oil pump builds up the oil pressure,
there will be a slight whine, or Sound, wait for the sound to disappear, or
after 10 seconds, then enter the next gear and stop for a while and hit the
car.
2. Keyless start
If it is a keyless start, after getting in the car, first press it lightly to
turn on the power. At this time, the instrument lights are not only connected
to the audio power; press lightly for the second time, but the instrument panel
lights also are on, equivalent to ON When the oil pump establishes the oil
pressure, wait a little longer, about 5-10 seconds, let the oil pump fully
establish the oil pressure, prepare to start, and the computer self-check of
each part is completed; finally, press for the third time, which is to press
and pause for 2 seconds. Start the vehicle; when the automatic transmission
starts, you need to step on the brake, when the manual transmission starts,
step on the clutch and release it after starting.
3. Plug-in smart key ignition
There is also a plug-in smart key similar to Audi, which is to insert a key
into the slot and press it to the end to start the vehicle. The principle of
this kind of key is the same, just press in more than half first to let the car
connect to the power. Stop for a while and let the oil pump build up the oil
pressure. After 5 seconds, press it all the way to start the vehicle, and you
can't press it all the way to start the vehicle.