Jump Start Manufacturing Company introduced the installation height and spacing of fire emergency lights:
Jump Start Manufacturing Company introduced the installation height
and spacing of fire emergency lights:
1. Installation height of double-head
fire-fighting lighting emergency light
Emergency lighting for fire evacuation
should be installed on the wall or ceiling (applicable to fire double-head
emergency lighting, fire emergency ceiling lights, fire emergency
downlights/spotlights, etc.). Double-head fire emergency lighting is often
installed above the door frame of fire evacuation passages or safe escape exits
or on the wall, at the corner of stairs, etc., and installed at a position
about 2.2 meters from the ground. Longer evacuation passages should be
installed in accordance with the fire protection system. According to the
guidance of the department, or according to the brightness of the emergency
lamps in the actual use place, the density of the lamps should be appropriately
increased, and the installation should be reasonable. Double-head fire
emergency lighting can also be installed on the column (such as electronic
city, shopping mall, station, etc.).
2. Installation position of fire emergency
ceiling lamp
Ceiling lights for fire emergency lighting
are generally installed on ceilings or ceilings. There are screw holes for
installation on the chassis of emergency luminaires. First, drill holes on the
ceiling and insert rubber plugs according to the mounting holes reserved for
the lamp panel. Fix the chassis of the luminaire with the screws first, then
install an electronic energy-saving lamp or incandescent bulb in the lamp panel
as required, turn on the power, tighten the lampshade, and finally test the
emergency function of the luminaire.
3. Installation position of fire emergency downlight/ceiling light/spotlight
Ceiling/recessed fire emergency
downlights. Ceiling lights/spotlights are generally installed on the ceiling. A
circlip device is provided on the edge of the luminaire for fixing the
luminaire. When installed, it is opened at the top of the selected ceiling.
After connecting the input power cord, squeeze the circlip with your hand, push
the circlip upward, and insert the bottom of the emergency lamp into the hole,
check whether the installation of the lamp is level, and then press the test
button to check the emergency function of the lamp Is it normal.
